Product description
Description:- Made of butyl material for heat resistance.This material eliminates vibrations, reduces general noise and rattle of the vehicle allowing for higher comfort.
- Self-adhesive sound dampening material,it is easy to install.
- It is desined in handy size which make it easier in terms of cutting.
- Block transmit sunlight, engine, exhaust pipe heat to the cab, reduce air conditioning energy consumption.
Specification:- Color: Black
- Material: Butyl Rubber, Aluminum
- Total Coverage Area: 25 sqft
- Thickness: 2mm / 0.08 inch / 80 mil
- Size: 600x400mm / 23.62''x15.75''(L*W)
Installation:- Decide what part you want to insulate first: car roof,car floor,car doors or a hood.
- Remove the remains of the factory insulation once you have dismantled the interior.Properly clean and degrease the surface prior to installation of mat.
- Measure the pre-cleaned surface of the prospective spot that you are going to treat.
- Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper.When your sheet is ready to used,lay that down to the surface and let is glue.Flatten the sheet with hands to avoid air bubbles.Use a roller for rolling down the foil as a neat step.
Installation Notices:- Please clean the surface you want to paste.
- You could heat with a hair dryer to make it soft,then compacted by hand.If the room temperature is below 5 degrees Celsius first with lamp heating it until soft.
- It would be best to wear the gloves when working.
Package Include:- 10 x Heat Sound Deadener Insulation Mat
- 1 x Manual