3-5 Minutes Economical Black & White Epoxy Adhesive

3-5 Minutes Rapid Economical Black & White Epoxy Adhesive

Feature:
5 Minutes Rapid Epoxy Adhesive is based on the room temperature, having the features of:
(1) solidifying rapidly within 3-5 minutes.
(2) suitable for small parts and structural strength.
(3) can be used after one hour.
(4) quick set and high adhesive performance.
(5) can be lacquered and waxed.
(6) waterproof and chemical resistance.
(7) joint layer is clear and elastic.

Main Component:
A component is the modified Epoxy Resin, B component is modified curing agent.

Scope Of Application:
The products of this series are widely used for bonding of metal and non-metals, connecting, sealing and repairing of hard materials, construction, automobile components, electronic components, also used for making arts and crafts etc.

Using Method:
1.The surface should be clean and dry, without oil or wax.
2.Take down the cap, pierce the seal, squeeze out evenly (A:B=1:1). and mix the two components evenly,
3.Press it according to the actual condition. It could achieve the using intensity after the solidifying for one hour during the normal temperature, it is suggested to operate at above 5℃.

Warning:
1.Do not squeeze the glue out too much to avoid drying quickly every time, and mix the two components evenly when using it;

2.Tighten the caps after using.

3.Wash the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying.
4.Avoid touching with the eyes and skin directly. If getting touch with the skin, please wash them at once by using of a cloth with alcohol before solidifying, then, clean them by soap and warm water. If getting touch with the eyes, please wash them immediately with plenty of water, and see a doctor for serious situation.
5.Take strict precautions against touching by the kids and entering into the mouth.

Storage And Packing:
1.Stock the products with air-tight seal in the environment of shade and dry. The shelf life is one year. It is available to use based on passing of the test if being beyond the shelf life.
2.Preserve and transport as non dangerous products.

3.Packing specification: 30g/card, in tube.