MR-J10MA Mitsubishi 100w power analog digital input driver

Detailed data ：

MR-J10MA Mitsubishi 100w power analog digital input driver

Mitsubishi MR-J10MA product information and technical parameters:

Brand: Mitsubishi

Product Name: He Fu Drive

Model: MR-J10MA

Type: MR-J series.

Rated output: 0.1KW.

Applicable motor series: HA-ME

Voltage: three-phase AC220V

This is of great help in improving the stability of low-speed control of servo motors and reducing low-speed pulsation,

But it has no direct effect on improving the accuracy of position control

Of course, software compensation similar to pitch compensation is also used,

It can improve the physical resolution of a single loop, thereby actually improving the accuracy of positioning control.

This can be effectively used in the control of indexing turntable robots.

It is precisely due to the application of internal insertion technology

This will enable rotary encoders to be more widely used in servo control in harsh environments.

The use of 224/revolution resolution rotary encoders on servo motors has been reported.

The encoder's serial communication adopts a provincial line system, and its communication frequency can only be limited to below 10M.

Other performance specifications of Mitsubishi MR-J10MA:

1 axis servo amplification.

Mitsubishi universal AC servo amplifier MELSERVO-J4 series,

Rated output: 1.0kw.

Interface: Universal.

Power supply: three-phase AC400V.

Mitsubishi MR-J10MA servo amplifier for 0.6kW and above

A servo amplifier that supports a universal interface.

Support servo amplifiers with versatile interfaces.

Position control can be achieved through pulse train commands, and speed/torque control can be achieved through analog voltage commands MR-J10MA

Supports large instruction pulse frequencies of 4MPulses/s

By supporting seismic algorithms for 3 inertial devices, two low-frequency vibrations can be simultaneously detected,

MR Configurator2 enables convenient adjustment.

Effectively generating low-frequency aftershocks below 100Hz at the front end of the boom or the main body of the device, Mitsubishi MR-J10MA

It can effectively shorten the time required for aftershock control.

The accuracy of arc trajectory can be improved in trajectory control of XY slide and other devices.

At the same time, it can effectively control the quadrant protrusion phenomenon caused by friction and twisting when the servo motor rotates in the opposite direction. Driver: MR-H_ ACN series

Column CC LINK function.

Rated output: 22KW

This testing system consists of two parts, namely the tested servo driver electric motor system and the upper computer Mitsubishi MR-J10MA

The upper computer sends the speed command signal to the servo driver

The servo driver starts running according to the command.

During operation, the upper computer and data acquisition circuit collect the operating data of the servo system,

And save, analyze, and display the data. As the motor in this testing system does not carry a load,

So compared to the previous two testing systems, the volume of this system is relatively smaller,

And the measurement and control circuits of the system are also relatively simple

However, this also makes it impossible for the system to simulate the actual operation of the Mitsubishi servo driver.

Usually, this type of testing system is only used for testing the rotational speed and angular displacement of the tested system under no-load conditions,

And cannot conduct accurate testing on the same server driver. Fiber length: 1.0 meters,

SSCNET III cable (standard optical fiber used inside the control cabinet).

Connector for CN1A and CN1B. 1 axis servo amplifier Mitsubishi servo driver.

Mitsubishi universal AC servo amplifier MELSERVO-J4 series.

Rated output: 11.0kw.

Interface: SSCNET III/H

Power supply: three-phase AC200V

Special specifications: Full closed-loop control 4-wire/device end encoder ABZ corresponding to input, supporting functional safety units, and positioning mode with three different server drives

Actuator.



Support SSCNET III/H servo amplifier.

A fully synchronous system using high-speed serial optical communication can be built.

It can be combined with a servo system controller to maximize the functional performance of the servo system,

Improve mechanical performance through electric motors.

By improving the resolution and processing speed of the encoder.

Enable rotary servo motors to have better positioning performance and smoother rotation performance Mitsubishi MR-J10MAMR-J10MA

The servo gain adjustment, including mechanical resonance filter, seismic control II and low-pass filter, can be carried out by turning on the one button adjustment function.

By easily activating advanced seismic features, mechanical performance can be maximized.

And can automatically implement real-time automatic adjustment of the required responsiveness settings