1 / 6
$500.00
≥1 Piece/Pieces
$400.00
≥20 Piece/Pieces
$300.00
≥50 Piece/Pieces
Options:
Model No. : | WSV-1 |
---|---|
Place Of Origin : | Jiangsu, China |
Wuxi, Jiangsu, China
Product description
The magnetic flowmeter consists of a non-magnetic pipe that is lined with an insulating material. A pair of magnetic coils is situated as shown in Figure 1, and a pair of electrodes penetrates the pipe and its lining
Product details
Medium |
Water, sewage water, acid, alkali etc. |
Diameter |
DN300~DN3000mm |
Accuracy |
±2.5% |
Temp. range |
-20~+150℃ |
Pressure |
1.6 MPa |
Flow rate |
0.5~6m/s |
Straight pipe required |
Up stream≥5DN, down stream≥3DN |
Electrode |
316L,Hastelloy C(HC), Titanium(Ti), Tantalum(Ta),Platinum(Pt) |
Installation way |
Without a ball valve or with a ball valve |
Body material |
Stainless steel |
Power supply |
220VAC/24VDC/Lithium battery |
Signal output |
Pulse output, 4~20mA |
Communication |
RS485,Hart, GPRS etc. |
Explosion proof |
No |
Protection class |
IP65(compact type), IP68(remote type) |
Working environment |
Temp. Range: -20~+60℃, humidity: 5%~90% |
Introduction
Insertion electromagnetic flowmeter is a new type of flowmeter developed on the basis of pipeline electromagnetic flowmeter. On the basis of retaining the advantages of pipeline type electromagnetic flowmeter,Aiming at the defects of pipeline electromagnetic flowmeter, such as difficult installation and high cost, etc..According to the principle of Nikola magnetic, the volumetric flow rate of the fluid is obtained by measuring the average flow velocity of the fluid by electromagnetic method. Especially with a pressure opening. With pressure mounting technology, the Insertion electromagnetic flowmeter can be installed without water stop, or it can be installed on cast iron pipes and cement pipes. The successful development of the Insertion electromagnetic flowmeter provides a new means for the detection of fluid flow.
FeaturesInsertion electromagnetic flowmeter in Pipeline Flow Detection,easy installation, no need to cut off the flow,On-site drill holewith pressure,it has absolute installation advantages and price advantages.
It is suitable for liquid flow detection of water, sewage, acid and strong alkali with conductivity above 5 ugs/cm. The change of conductivity does not affect the performance.Especially suitable for flow measurement of water supply and drainage pipelines.
Flowmeter movable mechanical parts, converter adopts optimal design, compact structure, easy to install, converter and sensor have interchangeability, can freely change the measurement range.
Flow detection is only related to the insertion depth, so the flowmeter has wide versatility and strong interchangeability. One type of flowmeter can be applied to the fluid measurement requirements of various specifications of pipelines. It can be connected with any standard secondary instrument.
( A ) 4- 20mA current output ;
(B ) Settable Pulse Output;
( C ) RS 485 Interface,HART protocol,MODBUS protocol.
² Range automatic switching function.The range of flowmeter can be switched automatically when the flow range changes.,assure accurate measurement in the whole range.
² Positive and negative flow calculation function.
² Upper and lower limit alarm.Users can set the upper and lower limit of instantaneous traffic according to their needs.
² Empty tube alarm.
² power-off protection
² Excision of interference small signal function.
² Zero point stability.
² Converters and sensors have a variety of protection levels and installation methods.
Wuxi, Jiangsu, China
Send your inquiry to this supplier