Video
1 / 4
Options:
place of origin : | China |
---|
Mianyang, Sichuan, China
Product description
Heat shrink wrap around sleeves consists low pre-heated special rubber adhesive and thick-wall irradiated cross linked polyolefin. When heated the backing layer shrinks and the adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces.It installed by wrapping the tape on the pipe joints ,fittings ,bends ,elbows etc .After the shrinking of the tape ,the closure patch should be installed onto the overlap of the tape. it suitable for pipe operating temperature, 60 ℃,80 ℃ and more high temperature.This heat shrinkable materials have other products too, such as 3 LPE Heat shrink sleeves, 2 PE heat shrink tape, 3 LPP wrap around sleeve, HDD heat shrink wrap sleeves , shrinkable tape closure patch and so on.
Features:
Excellent resistance to cathodic disbondment.
Long term corrosion protection.
Non hardening and non cracking.
Fast application and high performance.
Excellent chemical resistance
Excellent resistance to shear forces
Mechanical protection and moisture resistance.
Item |
Typical Value |
Typical Value |
Test Method |
|
|
HST 60 |
HST 80 |
- |
|
Operating Temperature |
Up to 60℃ |
Up to 80℃ |
- |
|
Backing |
|
|
|
|
Tensile Strength |
23.20 MPA |
23.50 MPA |
ASTM D-638 |
|
Elongation at Break |
650% |
600% |
ASTM D-638 |
|
Hardness, Shore D |
50 |
52 |
ASTM D-2240 |
|
Dielectric Strength |
32 Kv/mm |
32 Kv/mm |
ASTM D-149 |
|
Water Absorption |
<0.1% |
<0.1% |
ASTM D-570 |
|
Volume Resistivity |
2.5 x 1018 ohm.cm |
2.5 x 1018 ohm.cm |
ASTM D-257 |
|
Adhesive |
|
|
|
|
Item |
Typical Value |
Typical Value |
Test Method |
|
|
HST 60 |
HST 80 |
|
|
Softening Point |
90℃ |
121℃ |
ASTM E-28 |
|
Lap Shear |
2.3MPA @23℃ |
3.5 MPA @23℃ |
ISO 21809 |
|
Installed Sleeve |
|
|
|
|
Item |
Typical Value |
Typical Value |
Test Method |
|
|
HST 60 |
HST 80 |
|
|
Peel to Steel |
145N/cm@23℃ |
160N/cm@23℃ |
ASTM D 1000 |
|
Cathodic Disbondment |
<15 mm rad@23℃ |
<15 mm rad@23℃ |
DIN EN 12068 |
|
Impact Resistance |
> 15 J |
> 15 J |
DIN EN 12068 |
|
Indentation Resistance |
>1.0 mm@65℃ |
>1.0 mm@65℃ |
DIN EN 12068 |
|
Thickness Range |
1.5 mm to 2.9 mm |
|||
Width Range |
150 mm to 600 mm |
Video
Mianyang, Sichuan, China
Send your inquiry to this supplier